HK 3485
2 x 120W Stereo Receiver
(Both channels operating at full-rated power) Harman Kardon knows more about stereo receivers than anyone else. After all, we invented the product category almost fifty years ago! The HK 3485 is where traditional features such as a high-performance phono preamp, pre-out/main-in jacks and high-current amplification meet the present and future with video switching, a subwoofer output and a cable for direct audio/video connection to an iPod® player or MP3 player. Whether it comes from a turntable, the built-in tuner or a portable player, your music never sounded better!
SPECIFICATIONS: Audio |
| Stereo Mode : | | |
| Continuous Average Power (FTC) Per Channel : | | 120 Watts per channel, 20Hz – 20kHz @ <0.07% THD, both channels driven into 8 ohms
150 Watts per channel, 20Hz – 20kHz @ <0.2% THD, both channels driven into 4 ohms |
| Input Sensitivity/Impedance, Linear (High-Level) : | | 200mV/47k ohms |
| Signal-to-Noise Ratio (IHF-A) : | | 95dB |
| Frequency Response at 1W (+0dB, –3dB) : | | 10Hz – 110kHz |
| High Instantaneous Current Capability (HCC) : | | ±45 amps |
| Transient Intermodulation Distortion (TIM) : | | Unmeasurable |
| Rise Time : | | 16 µsec |
| Slew Rate : | | 40V/µsec |
| FM Tuner |
| Frequency Range : | | 87.5 – 108MHz |
| Usable Sensitivity : | | IHF 1.12µV/13.5dBf |
| Signal-to-Noise Ratio : | | Mono/Stereo 73/72dB |
| Distortion : | | Mono/Stereo 0.3/0.4% |
| Stereo Separation : | | 40dB @ 1kHz |
| Selectivity : | | ±400kHz, 65dB |
| Image Rejection : | | >80dB |
| IF Rejection : | | >100dB |
| Tuner Output Level : | | 1kHz, ±100kHz, Dev 500mV |
| AM Tuner |
| Frequency Range : | | 520 – 1720kHz |
| Signal-to-Noise Ratio : | | >40dB |
| Usable Sensitivity : | | Loop 500µV/M |
| Distortion : | | 1kHz, 50% Mod 0.8% |
| Selectivity : | | ±10kHz, >25dB |
| Video |
| Television Format : | | NTSC/PAL/SECAM |
| Signal Format System : | | Composite |
| Input Level/Impedance : | | 1V p-p/75 ohms, unbalanced |
| Sync Polarity : | | Negative |
| Output Level/Impedance : | | 1V p-p/75 ohms, unbalanced |
| Video Frequency Response : | | 10Hz – 10MHz |
| General |
| Power Requirement : | | AC 120V/60Hz |
| Power Consumption : | | 3W standby, 280W maximum (both channels driven) |
| Unit Dimensions : | | |
| Width : | | 17.4 inches (442mm) |
| Height : | | 6.6 inches (168mm) |
| Depth : | | 15 inches (382mm) |
| Carton Dimensions : | | 21.5 inches x 9.9 inches x 17.9 inches
(545mm x 251mm x 455mm) |
| Unit Weight : | | 20.9 lb (9.5kg) |
| Shipping Weight (System, Accessories, Packing) : | | 25.1 lb (11.4kg) |
Equipment 
